Does the UPPAbaby Aria V2 fit the UPPAbaby Minu V3?
Yes, with one adapter: the UPPAbaby Minu V3 adapter for Mesa and Aria.
What you need
UPPAbaby also sells these two together as the Minu V3 Aria V2 Travel System.
This answer is for the UPPAbaby Minu V3. Not sure which Minu you have?
Key specs
- Adapter
- about $39.99
- Whole set, list prices
- $989.97
- Weight with carrier
- 22.7 lb
- Seat rated to
- 30 lb, 30 in
- On planes (FAA)
- Yes
- Stroller folded
- 10 x 18 x 21.5 in (L x W x H)
Good to know before you click it on
- Recline the Minu V3 seat fully before attaching Mesa/Aria; adapters adjust down so the stroller folds with them.
About this pair
The UPPAbaby Aria V2 goes on the UPPAbaby Minu V3 with the UPPAbaby Minu V3 adapter for Mesa and Aria (model 0904-MMA-WW), about $39.99. With the carrier on, you are pushing about 22.7 lb (16.7 lb stroller, 6 lb carrier). The seat itself is rated up to 30 lb and up to 30 in, per UPPAbaby.
Read more ↓Show less ↑
26 other infant seats fit the UPPAbaby Minu V3.
Summary from the makers' published data.
How to set up the UPPAbaby Aria V2 on the UPPAbaby Minu V3
What you need
- The UPPAbaby Minu V3
- The UPPAbaby Aria V2 carrier (its car base stays in the car)
- The UPPAbaby Minu V3 adapter for Mesa and Aria (model 0904-MMA-WW)
The adapter maker shows the fitting steps in pictures; see the manuals below.
Before every walk
Check that the carrier is locked on both sides the way your manual describes. How we check our answers
Last check: give the carrier handle a gentle tug. A seat that is fully latched does not lift off.
Questions about this pair (10)
Does the UPPAbaby Aria V2 fit the UPPAbaby Minu V3?
Yes, with one adapter: the UPPAbaby Minu V3 adapter for Mesa and Aria.
Which adapter do I need for the UPPAbaby Aria V2 on the UPPAbaby Minu V3?
UPPAbaby Minu V3 adapter for Mesa and Aria (about $39.99).
Can I fold the Minu V3 with the adapter on?
Recline the Minu V3 seat fully before attaching Mesa/Aria; adapters adjust down so the stroller folds with them.
How heavy are they together?
22.7 lb: the Minu V3 weighs 16.7 lb and the Aria V2 carrier 6 lb.
How much does the whole set cost?
About $989.97 at the makers' list prices, including the $39.99 adapter. Stores and sales vary.
Does the Aria V2 fit every Minu version?
The makers give the same answer for all 3 Minu versions we track.
Can I take the Aria V2 on a plane?
Yes, but the maker approves it for aircraft only without the base.
How do I install the Aria V2 in the car?
UPPAbaby's manual gives 3 ways; the steps are on its install page.
Are they sold together?
Yes, UPPAbaby sells them as the Minu V3 Aria V2 Travel System.
Where does this answer come from?
From the makers' own pages: UPPAbaby adapter page.
The UPPAbaby Aria V2 on each Minu
- UPPAbaby Minu (original)Needs an adapter
- UPPAbaby Minu V2Needs an adapter
- UPPAbaby Minu V3Needs an adapterThis page
Other car seats for the UPPAbaby Minu V3
Illustration Illustration Illustration Illustration Illustration Illustration
Other strollers for the UPPAbaby Aria V2
Illustration Illustration Illustration Illustration Illustration Illustration
Pros and cons of this pairing
Why parents pick it
- UPPAbaby sells these two together as a travel system. (maker)
- Light together: about 22.7 lb (a typical pairing is 34.4 lb). (compared with the strollers and seats we list)
- The car seat can fly with you (FAA approved). (maker)
Keep in mind
- Needs the UPPAbaby Minu V3 adapter for Mesa and Aria (about $39.99). (maker)
Manuals and downloads
Straight from the makers. The manual that came with your product is the one to follow.
How we know: the makers' own words
UPPAbaby says it needs an adapter (Minu V3 adapter for Mesa and Aria).
“Create a from birth solution or a travel system on your Minu V3 stroller. … Compatible with Aria and all Mesa infant car seats”
UPPAbaby adapter page · checked 2026-09-24
Always check both manuals before the first walk. How we check.