Which strollers does the UPPAbaby Aria V2 fit?
6 strollers take it with no adapter and 6 with one adapter, according to the makers.
UPPAbaby strollers that take the UPPAbaby Aria V2
Some click right in; the rest need the adapter below.
Illustration Illustration Illustration Illustration Illustration Illustration 
Illustration Illustration Illustration 
Illustration Illustration
Mockingbird strollers that take the UPPAbaby Aria V2
You'll need this adapter.
* The maker names the model but not which version; open the card for what to check.
Key specs
- Child weight
- 4–30 lb
- Child height
- up to 30 in
- Carrier weight
- 6 lb
- Install
- With the base or without
- On a plane
- Only without the base
- Expires
- 7 years after it was made
About the UPPAbaby Aria V2
The UPPAbaby Aria V2 is a rear-facing infant car seat for babies from 4 to 30 lb and up to 30 in tall. The carrier alone weighs 6 lb. Base: lATCH + seat belt base (auto-retracting LATCH, built-in lock-off), load leg, Anti-Rebound+ Panel. UPPAbaby says it is approved for use on aircraft. UPPAbaby gives it a 7-year life from the date of manufacture. List price: $449.99. UPPAbaby points to load leg, anti-rebound panel, 4 to 30 lb, install without the base, latch and belt lock-off and 4 more; see the details below.
Read more ↓Show less ↑
12 strollers take it according to the makers, 6 with no adapter (UPPAbaby Cruz (2015–2019), UPPAbaby Cruz V2, UPPAbaby Cruz V3 and 3 more). By kind: 7 full-size strollers, 3 compact travel strollers and 2 jogging strollers. The lightest pairing we have figures for is the UPPAbaby Minu (original) at 14.8 lb, about 20.8 lb with the carrier on.
Summary from the makers' published data.
Highlights
- Load leg, anti-rebound panelThe base has a load leg and the seat has an Anti-Rebound+ panel. UPPAbaby product page
- 4 to 30 lbFor babies from 4 to 30 lb and up to 30 inches tall, whichever comes first (US). UPPAbaby product page
- Install without the baseThe carrier can be installed with the seat belt alone, without the base. UPPAbaby product page
- LATCH and belt lock-offThe base has auto-retracting LATCH and a built-in lock-off for belt installs. UPPAbaby product page
- Red-to-green install indicatorAn indicator turns from red to green when the base is installed correctly. UPPAbaby product page
- Two-piece infant insertA two-piece insert fits babies from 4 lb. UPPAbaby product page
- Flame-retardant-free fabricsAll fabric options are made without flame-retardant chemicals. UPPAbaby product page
- FAA-certified carrierThe carrier is certified for use on aircraft. UPPAbaby product page
Build your travel system
Pick the other half to see the whole set at the makers' list prices.
List prices from the makers; stores and sales vary.
Compare the Aria V2 with similar infant seats
The closest seats of the same kind by weight and price. Every figure is the maker's.
| UPPAbabyAria V2This one | NunaPipa Aire | NunaPipa Aire RX | NunaPipa RX | |
|---|---|---|---|---|
| Carrier weight | 6 lb | 6 lb | 6.2 lb | 7.6 lb |
| Baby weight up to | 30 lb | 30 lb | 30 lb | 30 lb |
| Baby height up to | 30 in | 30 in | 30 in | 30 in |
| Without the base | Yes | No | Yes | Yes |
| On a plane | Yes | Yes | Yes | Yes |
| Expires after | 7 yrs | — | — | — |
| Strollers that fit | 12 | 16 | 22 | 27 |
| …with no adapter | 6 | 3 | 3 | 3 |
| List price | $449.99 | $440 | $650 | $550 |
| Check price | Check price | Check price | Check price |
How to use the UPPAbaby Aria V2
Step-by-step guides from the maker's manual. Pick one.
Canopy
- 1The hide-away canopy sets in one of two positions.
- 2To open it, pull the main canopy frame forward slowly until it rests where you want it.
- 3For more shade and privacy, fold out the extra sunshade.
- 4To put it away, push the main canopy frame upward gently so the support and fabric slide into the storage space in the carrier.
- 5In the car the canopy can be fully open or tucked away.
- Never remove the canopy while the seat is in the vehicle.
Retold from UPPAbaby manual (PDF).
Common problems with the UPPAbaby Aria V2
- Wipe the frame with a damp cloth and a mild detergent, then dry it well. Do not use anything abrasive.
- If the frame touched salt water, rinse those parts with fresh tap water as soon as you can to stop corrosion.
- Spot clean or hand wash the fabrics in cold water with mild detergent and dry them flat, out of direct sun. No bleach, ironing or dry cleaning.
- Do not fold or store the stroller while it is damp or wet.
- UPPAbaby sells genuine replacement parts, including wheels, seat fabrics and canopies, on its Spare Parts page.
- If you cannot find the part you need, contact UPPAbaby Customer Experience at (844) 823-3132 or support@uppababy.com.
The UPPAbaby Aria V2: pros and cons
Why parents pick it
- Fits 12 strollers, directly or with an adapter. (from the makers' fit charts)
- 6 strollers take it with no adapter. (from the makers' fit charts)
- Light carrier: 6 lb (typical 9.5 lb). (compared with the strollers and seats we list)
- Approved for use on aircraft. (maker)
- 7-year life from manufacture. (maker)
Keep in mind
- Rated to 30 lb, lower than most (32 lb), so babies outgrow it sooner. (compared with the strollers and seats we list)
Manuals and downloads
Straight from the makers. The manual that came with your product is the one to follow.
Frequently asked questions (15)
What are the weight and height limits of the UPPAbaby Aria V2?
4–30 lb, up to 30 in tall.
Can you use the UPPAbaby Aria V2 without the base?
Yes. UPPAbaby's manual describes one way to install it with no base: with the European belt path.
How do I install the UPPAbaby Aria V2?
UPPAbaby's manual gives 3 ways: with the base, using LATCH; with the base, using the car's seat belt; without the base, with the European belt path.
Is the UPPAbaby Aria V2 FAA approved?
Yes, but the maker approves it for aircraft only without the base.
When does the UPPAbaby Aria V2 expire?
7 years after the date it was made; the date is on the seat's label.
What base does the UPPAbaby Aria V2 use?
LATCH + seat belt base (auto-retracting LATCH, built-in lock-off), load leg, Anti-Rebound+ Panel.
Can I buy an extra UPPAbaby base?
A Mesa V3 carrier clicks into the original Mesa base and the Mesa V2 base, so an older spare base still works with the newer seat.
Which strollers does the UPPAbaby Aria V2 fit?
12 strollers, according to the makers: 6 take it with no adapter, 6 with one adapter.
Which strollers take the UPPAbaby Aria V2 without an adapter?
UPPAbaby Cruz (2015–2019), UPPAbaby Cruz V2, UPPAbaby Cruz V3, UPPAbaby Vista (2015–2019) and 2 more.
Does the UPPAbaby Aria V2 fit the Mockingbird Single Stroller 2.0?
Yes, with the Mockingbird Car seat adapter for UPPAbaby seats.
Does the UPPAbaby Aria V2 fit the UPPAbaby Vista V2?
Yes, it clicks right in with no adapter.
Does the UPPAbaby Aria V2 fit the UPPAbaby Vista V3?
Yes, it clicks right in with no adapter.
When do I use or remove the UPPAbaby Aria V2 infant insert?
The insert has two parts: a preemie cushion and a back positioning insert. Use it from 4 lbs, up to about 4 months. Find the fastener tabs inside the headrest, at its upper left and right.
Specifications
Weight and size
| Carrier weight (no base) | 6 lb2 |
|---|
Base, safety and travel
| Base | LATCH + seat belt base (auto-retracting LATCH, built-in lock-off), load leg, Anti-Rebound+ Panel2 |
|---|---|
| Approved for aircraft | Yes1 |
| Expires after | 7 years1 |
Price and dates
| List price | $449.992 |
|---|
From the makers' fit charts
| Strollers that fit | 12 |
|---|---|
| …with no adapter | 6 |
| Ways to install (maker's manual) | 3 |
| Step-by-step guides | 7 |