First Baby Mall

Which strollers does the Nuna Pipa Aire fit?

3 strollers take it with no adapter and 13 with one adapter, according to the makers.

An infant carrier on a stroller in the park (illustration)
Illustration
Nuna Pipa Aire (illustration)
Illustration

Nuna

Pipa Aire

$440 list price

Carrier weighs 6 lb

How to install it in the car

Several Nuna PIPA series versions exist. Which one is yours?

Nuna strollers that take the Nuna Pipa Aire

Some click right in; the rest need the adapter below.

DEMI next car seat adapters (in the box) (illustration)

Adapter · in the box

Nuna DEMI next car seat adapters (in the box)

Comes with the stroller · for 1 seat below

MIXX car seat ring (in the box) (illustration)

Adapter · in the box

Nuna MIXX car seat ring (in the box)

Comes with the stroller · for 1 seat below

TRIV next folding car seat ring (in the box) (illustration)

Adapter · in the box

Nuna TRIV next folding car seat ring (in the box)

Comes with the stroller · for 1 seat below

UPPAbaby strollers that take the Nuna Pipa Aire

You'll need this adapter.

PIPA adapter for UPPAbaby Vista and Cruz (illustration)

Adapter you need

Nuna PIPA adapter for UPPAbaby Vista and Cruz

about $75 · for 6 seats below

Bugaboo strollers that take the Nuna Pipa Aire

You'll need one of these adapters.

Butterfly 2 car seat adapter (illustration)

Adapter you need

Bugaboo Butterfly 2 car seat adapter

about $69.95 · for 1 seat below

Donkey car seat adapter (single/double) (illustration)

Adapter you need

Bugaboo Donkey car seat adapter (single/double)

about $79.95 · for 1 seat below

Mockingbird strollers that take the Nuna Pipa Aire

You'll need this adapter.

4-in-1 car seat adapter (illustration)

Adapter you need

Mockingbird 4-in-1 car seat adapter

about $50 · for 1 seat below

Thule strollers that take the Nuna Pipa Aire

You'll need this adapter.

Urban Glide 3 adapter for Maxi-Cosi seats (illustration)

Adapter you need

Thule Urban Glide 3 adapter for Maxi-Cosi seats

about $69.95 · for 1 seat below

* The maker names the model but not which version; open the card for what to check.

Key specs

Child weight
4–30 lb
Child height
up to 30 in
Carrier weight
6 lb

About the Nuna Pipa Aire

The Nuna Pipa Aire is a rear-facing infant car seat for babies from 4 to 30 lb and up to 30 in tall. The carrier alone weighs 6 lb. Base: pIPA series base: True lock rigid LATCH or seat belt, steel stability (load) leg; also installs baseless with vehicle belt. Nuna says it is approved for use on aircraft. List price: $440. Nuna points to load leg on the base, rigid latch base, plane use, base optional, install check indicators and 4 more; see the details below.

Read more ↓

16 strollers take it according to the makers, 3 with no adapter (Nuna TAVO next, Nuna TRVL and Nuna TRVL lx). By kind: 13 full-size strollers and 3 compact travel strollers. The lightest pairing we have figures for is the Nuna TRVL at 13.6 lb, about 19.6 lb with the carrier on.

Summary from the makers' published data.

Highlights

  • Load leg on the baseThe included PIPA series base has a steel stability leg to limit forward rotation in a crash. Nuna product page
  • Rigid LATCH baseThe base clicks onto the car's lower anchors with rigid latches. Nuna product page
  • Plane use, base optionalCertified for use on aircraft with or without the base. Nuna product page
  • Install check indicatorsColored indicators and bubble levels show when the base is connected and level. Nuna product page
  • Side-impact protectionThe shell has side-impact protection. Nuna product page
  • No added fire retardantsNuna says the materials have no added fire-retardant chemicals. Nuna product page
  • UPF 50+ canopy, privacy drapeCanopy with a flip-out eyeshade plus a pull-down drape. Nuna product page
  • From 4 lb, with insertsFits babies 4 to 30 lb and 16 to 30 in; removable head and body inserts for newborns. Nuna product page
Putting a travel system together (illustration)

Build your travel system

Pick the other half to see the whole set at the makers' list prices.

List prices from the makers; stores and sales vary.

Three strollers side by side (illustration)

Compare the Pipa Aire with similar infant seats

The closest seats of the same kind by weight and price. Every figure is the maker's.

NunaPipa AireThis oneUPPAbabyAria V2ClekLiingPeg PeregoPrimo Viaggio Lounge
Carrier weight6 lb6 lb9 lb10.4 lb
Baby weight up to30 lb30 lb30 lb30 lb
Baby height up to30 in30 in32 in32 in
Without the baseNoYesYes—
On a planeYesYesYes—
Expires after—7 yrs9 yrs7 yrs
Strollers that fit1612220
…with no adapter3600
List price$440$449.99$499.99$499.99
Check priceCheck priceCheck priceCheck price
Putting it in the carHow to install the Nuna Pipa Aire →Nuna's steps for the base with LATCH, the base with the seat belt, the carrier on and off the base, and which bases it goes with.
Hands folding a stroller (illustration)

How to use the Nuna Pipa Aire

Step-by-step guides from the maker's manual. Pick one.

Canopy

  1. 1To attach the canopy, snap it to the canopy mount on both sides.
  2. 2Pull the canopy toward the front of the seat to open it; push it back to close it.
  3. 3For the Sky Drape, unzip the zipper behind the front canopy bow, pull the drape out and attach it to the magnets at each front corner.
  4. 4To remove the canopy, undo the snap on the mount, press the canopy release button and pull the canopy out of the mount; repeat on the other side.

Retold from Nuna manual (PDF).

Common problems with the Nuna Pipa Aire

Compare Nuna PIPA series versions

How to tell which PIPA series you have

The Nuna Pipa Aire: pros and cons

Why parents pick it

  • Fits 16 strollers, directly or with an adapter. (from the makers' fit charts)
  • 3 strollers take it with no adapter. (from the makers' fit charts)
  • Light carrier: 6 lb (typical 9.5 lb). (compared with the strollers and seats we list)
  • Approved for use on aircraft. (maker)

Keep in mind

  • Rated to 30 lb, lower than most (32 lb), so babies outgrow it sooner. (compared with the strollers and seats we list)

Manuals and downloads

Straight from the makers. The manual that came with your product is the one to follow.

Checking a question on a phone next to a stroller (illustration)

Frequently asked questions (14)

What are the weight and height limits of the Nuna Pipa Aire?

4–30 lb, up to 30 in tall.

Nuna manual (PDF)

How much does the Nuna Pipa Aire carrier weigh?

6 lb without the base.

Nuna product page

Can you use the Nuna Pipa Aire without the base?

The Nuna manual we hold describes installing it with the base only.

Install stepsNuna manual (PDF)

How do I install the Nuna Pipa Aire?

Nuna's manual gives 2 ways: with the base, using LATCH; with the base, using the car's seat belt.

Step by step

Is the Nuna Pipa Aire FAA approved?

Yes, with or without the base, the maker says.

Flying with a babyNuna product page

What base does the Nuna Pipa Aire use?

PIPA series base: True lock rigid LATCH or seat belt, steel stability (load) leg; also installs baseless with vehicle belt.

Nuna product page

Can I buy an extra Nuna base?

Every PIPA infant seat except the PIPA urbn fits both the original PIPA series base and the newer PIPA RELX base. Either base can be bought on its own as a spare.

Nuna help article

Which strollers does the Nuna Pipa Aire fit?

16 strollers, according to the makers: 3 take it with no adapter, 13 with one adapter.

See them all

Which strollers take the Nuna Pipa Aire without an adapter?

Nuna TAVO next, Nuna TRVL, Nuna TRVL lx.

TAVO nextTRVLTRVL lx

Does the Nuna Pipa Aire fit the Mockingbird Single Stroller 2.0?

Yes, with the Mockingbird 4-in-1 car seat adapter.

The makers' answer

Does the Nuna Pipa Aire fit the Nuna MIXX next?

Yes, with the Nuna MIXX car seat ring (in the box).

The makers' answer

Does the Nuna Pipa Aire fit the UPPAbaby Vista V2?

Yes, with the Nuna PIPA adapter for UPPAbaby Vista and Cruz.

The makers' answer

When do I use or remove the Nuna Pipa Aire infant insert?

Use the head and body supports as needed for a snug fit on a small baby. For smaller babies, the low birth weight pillow sits in the back of the body support; remove it once you can get a snug fit without it (about 11 lb) by opening the hook-and-loop on the back and pulling it out.

Nuna manual (PDF)

How much does the Nuna Pipa Aire cost?

Nuna lists it at $440. Store prices and sales vary.

Nuna product page

Specifications

Your baby

Child weight from4 lb1
Child weight up to30 lb1
Child height up to30 in1

Weight and size

Carrier weight (no base)6 lb2

Base, safety and travel

BasePIPA series base: True lock rigid LATCH or seat belt, steel stability (load) leg; also installs baseless with vehicle belt2
Approved for aircraftYes2

Price and dates

List price$4402

From the makers' fit charts

Strollers that fit16
…with no adapter3
Ways to install (maker's manual)2
Step-by-step guides7
Sources (2)
  1. 1. Nuna manual (PDF)
  2. 2. Nuna product page