The Nuna Pipa Lite LX is a rear-facing infant car seat for babies from 4 to 32 lb and up to 32 in tall. The carrier alone weighs 5.7 lb. Base: pIPA series base only (rigid LATCH or seat belt, stability leg); cannot be installed without the base. Nuna says it is approved for use on aircraft. Nuna points to base-only install, merino wool blend fabric, no added fire retardants, side-impact protection and 3 more; see the details below.
Read more ↓Show less ↑
25 strollers take it according to the makers, 3 with no adapter (Nuna TAVO next, Nuna TRVL and Nuna TRVL lx). By kind: 15 full-size strollers, 7 compact travel strollers and 3 jogging strollers. The lightest pairing we have figures for is the Nuna TRVL at 13.6 lb, about 19.3 lb with the carrier on.
Step-by-step guides from the maker's manual. Pick one.
Canopy
1To attach the canopy, snap it to the canopy mount on both sides.
2Pull the canopy toward the front of the seat to open it; push it back to close it.
3For the canopy drape (PIPA lite lx), unzip the zipper behind the front canopy bow, pull the drape out and attach it to the magnets at each front corner.
4To remove the canopy, unsnap it, unsnap the seat pad from the shell and lift the fabric, then press the canopy release button and pull the canopy through the fabric slot; repeat on the other side.
Flip out the angle adjustment foot under the base to recline it further.
If that is still not enough, put a tightly rolled towel or a pool noodle under the base instead.
Do not use the adjustment foot and a towel or noodle at the same time.
The angle is right once the bubble touches the line; it does not have to be centered on it.
It depends on the model.
The PIPA, PIPA rx and PIPA lite rx can be installed with or without the base.
The PIPA lite, PIPA lite lx and PIPA lite r must always be installed on the base.
Yes for every PIPA infant seat except the PIPA urbn: they fit both the PIPA series base and the newer PIPA RELX base.
The PIPA, PIPA lite and PIPA lite lx come with the series base; the PIPA rx, PIPA lite r and PIPA lite rx come with the RELX base.
Either base can be bought separately as a second base.
Nuna has only limited spare parts, and orders are completed over the phone.
Email info.usa@nunababy.com or send a support request with the model number from the serial label, the part you need (frame, wheel and so on) and a callback number.
Nuna checks availability, tells you the price and calls you to finish the order.
Every PIPA infant seat except the PIPA urbn fits both the original PIPA series base and the newer PIPA RELX base. Either base can be bought on its own as a spare.
When do I use or remove the Nuna Pipa Lite LX infant insert?+
Use the head and body supports as needed for a snug fit on a small baby. For smaller babies, the low birth weight pillow sits in the back of the body support; remove it once you can get a snug fit without it (about 11 lb) by opening the hook-and-loop and pulling it out.
Can I use my PIPA without the base, for example in a taxi or on a trip?+
It depends on the model. The PIPA, PIPA rx and PIPA lite rx can be installed with or without the base. The PIPA lite, PIPA lite lx and PIPA lite r must always be installed on the base.
