Does the Nuna Pipa (original) fit the Thule Urban Glide 2?

Yes, with an adapter

Yes, with one adapter: the Thule Urban Glide 2 adapter for Maxi-Cosi seats (one other adapter also works).

An infant carrier on a stroller in the park (illustration) — Illustration

What you need

Car seat

Nuna Pipa (original) (illustration) — Illustration

Car seatNuna Pipa (original)price not listedCheck price

Adapter

AdapterThule Urban Glide 2 adapter for Maxi-Cosi seatsprice not listedGet this adapter

Stroller

Thule Urban Glide 2 (illustration) — Illustration

StrollerThule Urban Glide 2price not listedCheck price

Also works: Thule Urban Glide 1 & 2 universal car seat adapter

This answer is for the Thule Urban Glide 2. Not sure which Urban Glide you have?

Key specs

Adapter: price not listed
Weight with carrier: 33 lb
Stroller folded: 34.2 x 27.2 x 13.3 in

Good to know before you click it on

Child weight limit 22 lb (10 kg) when using the adapter.
Maxi-Cosi CabrioFix: back panel must be unclipped or removed; Maxi-Cosi Citi and Pebble: strap will be tight.
The seat strap must be buckled over the car seat, and all clips must be fully closed.

About this pair

The Nuna Pipa (original) goes on the Thule Urban Glide 2 with the Thule Urban Glide 2 adapter for Maxi-Cosi seats (model 20110740). With the carrier on, you are pushing about 33 lb (25 lb stroller, 8 lb carrier).

How to set up the Nuna Pipa (original) on the Thule Urban Glide 2

These steps are for the Thule Urban Glide 1 & 2 universal car seat adapter, the adapter whose steps we hold. The Thule Urban Glide 2 adapter for Maxi-Cosi seats fits too; follow its own manual.

An infant car seat mounted on a stroller (illustration)

What you need

The Thule Urban Glide 2
The Nuna Pipa (original) carrier
The Thule Urban Glide 1 & 2 universal car seat adapter

Step by step

Set the stroller's parking brake and open the clips on the adapter.
Fit the adapter on the left side of the stroller (as you face it): open the velcro and zipper on the center seat divider and clip the adapter to the accessory mount there, keeping fabric out from under it.
Clip the other end onto the stud on the left side frame, close the velcro, and give the adapter a sharp pull to check it is secure.
Unfold the adapter and set the car seat in it facing the handlebar, at the angle its maker requires.
Buckle the seat strap over the car seat and pull it tight.
Lift gently on the car seat handle to check it is attached.

Retold from Thule manual (PDF).

Don't

Maximum child weight with this adapter is 22 lb (10 kg).
The baby must face you; never put the car seat in facing forward.
If the car seat cannot sit at the right angle, it does not fit this adapter.
To fold with the adapter on, fold the adapter and buckle the seat strap first.
Re-check the adapter after the stroller has been folded or carried in a car.

Checking the car seat is locked in (illustration)

Last check: give the carrier handle a gentle tug. A seat that is fully latched does not lift off.

Checking a question on a phone next to a stroller (illustration)