First Baby Mall

Does the Nuna Pipa Urbn fit the UPPAbaby Vista V2?

Yes, with an adapter

Yes, with one adapter: the UPPAbaby Maxi-Cosi, Nuna, Cybex and Clek adapter for Vista and Cruz (one other adapter also works).

An infant carrier on a stroller in the park (illustration) — Illustration

What you need

Car seat

Nuna Pipa Urbn (illustration) — Illustration

Car seatNuna Pipa Urbnprice not listedCheck price

Adapter

Maxi-Cosi, Nuna, Cybex and Clek adapter for Vista and Cruz (illustration) — Illustration

AdapterUPPAbaby Maxi-Cosi, Nuna, Cybex and Clek adapter for Vista and Cruzabout $49.99Get this adapter

Stroller

UPPAbaby Vista V2 (illustration) — Illustration

StrollerUPPAbaby Vista V2price not listedCheck price

Also works: Nuna PIPA adapter for UPPAbaby Vista and Cruz (about $75)

This answer is for the UPPAbaby Vista V2, though one maker didn't say which version. Not sure which Vista you have?

Key specs

Adapter: about $49.99
Weight with carrier: 34 lb
Seat rated to: 30 lb, 29 in
On planes (FAA): Yes
Stroller folded: 17.3 x 25.7 x 33.3 in (L x W x H, seat attached)

Good to know before you click it on

Not for pre-2015 Vista. Stroller folds with the adapters on.
2015 and newer Vista/Cruz only; do not use with the RumbleSeat.
Do not hang accessories on the stroller handle while the adapter and carrier are in use (stability).

About this pair

The Nuna Pipa Urbn goes on the UPPAbaby Vista V2 with the UPPAbaby Maxi-Cosi, Nuna, Cybex and Clek adapter for Vista and Cruz (model 0919-UMA-WW), about $49.99. With the carrier on, you are pushing about 34 lb (27 lb stroller, 7 lb carrier). The seat itself is rated up to 30 lb and up to 29 in, per Nuna.

Read more ↓

32 other infant seats fit the UPPAbaby Vista V2; UPPAbaby Aria V2, UPPAbaby Mesa (original), UPPAbaby Mesa Max and 2 more need no adapter at all.

The answer is not the same on every Vista: it differs on the Vista (before 2015), as the table below shows.

Summary from the makers' published data.

How to set up the Nuna Pipa Urbn on the UPPAbaby Vista V2

These steps are for the Nuna PIPA adapter for UPPAbaby Vista and Cruz, the adapter whose steps we hold. The UPPAbaby Maxi-Cosi, Nuna, Cybex and Clek adapter for Vista and Cruz fits too; follow its own manual.

Lifting the car seat off before folding (illustration)

What you need

The UPPAbaby Vista V2
The Nuna Pipa Urbn carrier (its car base stays in the car)
The Nuna PIPA adapter for UPPAbaby Vista and Cruz (model AD-08-001)

Step by step

Slide the two halves of the adapter together until they click, then pull on both ends to check the join.
Set the adapter onto the stroller's seat mounts and press until it clicks.
Place the PIPA car seat on the adapter and press down until it clicks.
Pull up on the car seat to check it is locked to the adapter and the adapter is locked to the stroller.

Retold from Nuna manual (PDF).

Don't

Fits only Vista and Cruz strollers made in 2015 or later.
Do not use it with the RumbleSeat.
Take the car seat off before folding the stroller.
Do not hang bags or other accessories on the stroller handle while the car seat is on the adapter.
Do not push or lift the stroller by the car seat's carry handle.

Checking the car seat is locked in (illustration)

Last check: give the carrier handle a gentle tug. A seat that is fully latched does not lift off.

Install the Pipa Urbn in the car →Fold and use the Vista V2 →

Checking a question on a phone next to a stroller (illustration)

Questions about this pair (9)

Does the Nuna Pipa Urbn fit the UPPAbaby Vista V2?

Yes, with an adapter (2 options).

Nuna adapter page

Which adapter do I need for the Nuna Pipa Urbn on the UPPAbaby Vista V2?

UPPAbaby Maxi-Cosi, Nuna, Cybex and Clek adapter for Vista and Cruz (about $49.99); Nuna PIPA adapter for UPPAbaby Vista and Cruz (about $75).

Adapter details

Can I fold the Vista V2 with the adapter on?

Stroller folds with the adapters on.

UPPAbaby adapter page

How heavy are they together?

34 lb: the Vista V2 weighs 27 lb and the Pipa Urbn carrier 7 lb.

Does the Pipa Urbn fit every Vista version?

Not the same on every version: the answer changes between Vista versions, so check which one you have.

Which Vista do I have?

Can I take the Pipa Urbn on a plane?

Yes, the maker says it is certified for use in aircraft.

Flying with a baby Nuna manual (PDF)

How do I install the Pipa Urbn in the car?

Nuna's manual gives 3 ways; the steps are on its install page.

Which seats click into the Vista V2 with no adapter?

UPPAbaby Aria V2, UPPAbaby Mesa (original), UPPAbaby Mesa Max, UPPAbaby Mesa V2 and 1 more.

All seats for this stroller

Where does this answer come from?

From the makers' own pages: Nuna adapter page, UPPAbaby adapter page.

See the makers' words

The Nuna Pipa Urbn on each Vista

How to tell which Vista you have

Pros and cons of this pairing

Why parents pick it

The car seat can fly with you (FAA approved). (maker)

Keep in mind

Needs the UPPAbaby Maxi-Cosi, Nuna, Cybex and Clek adapter for Vista and Cruz (about $49.99). (maker)
One maker didn't say which stroller version this applies to. (from the makers' fit charts)
The answer is different on another Vista version, so check yours. (from the makers' fit charts)

Manuals and downloads

Straight from the makers. The manual that came with your product is the one to follow.

Try another car seat on this stroller

Try this car seat on another stroller

How we know: the makers' own words

Nuna says it needs an adapter (PIPA adapter for UPPAbaby Vista and Cruz).
“Attach any Nuna PIPA series infant car seat to the UPPAbaby® Vista and Cruz (2015 and later UPPAbaby® Vista/Vista V2/Vista V3 and Cruz/Cruz V2/Cruz V3 Strollers) stroller using this adapter.”
Nuna adapter page · checked 2026-09-24
UPPAbaby says it needs an adapter (Maxi-Cosi, Nuna, Cybex and Clek adapter for Vista and Cruz).
“to the frame of your Vista (models 2015-2019), Vista V2, Vista V3, Cruz (models 2015-2019), Cruz V2, Cruz V3, and Kona … Only compatible with … Nuna® PIPA urbn”
UPPAbaby adapter page · checked 2026-09-24
Nuna says it needs an adapter (PIPA adapter for UPPAbaby Vista and Cruz), without saying which version.
“Attach any Nuna PIPA series infant car seat to the UPPAbaby® Vista and Cruz (2015 and later UPPAbaby® Vista/Vista V2/Vista V3 and Cruz/Cruz V2/Cruz V3 Strollers) stroller using this adapter.”
Nuna adapter page · checked 2026-09-24

Always check both manuals before the first walk. How we check.