Not for pre-2015 Vista. Stroller folds with the adapters on.
Single mode only; Vista only from 2015 on (not pre-2015 Vista).
About this pair
The Clek Liing goes on the UPPAbaby Cruz V2 with the UPPAbaby Maxi-Cosi, Nuna, Cybex and Clek adapter for Vista and Cruz (model 0919-UMA-WW), about $49.99. With the carrier on, you are pushing about 34.5 lb (25.5 lb stroller, 9 lb carrier). The seat itself is rated up to 30 lb and up to 32 in, per Clek.
Read more ↓Show less ↑
32 other infant seats fit the UPPAbaby Cruz V2; UPPAbaby Aria V2, UPPAbaby Mesa (original), UPPAbaby Mesa Max and 2 more need no adapter at all.
Summary from the makers' published data.
How to set up the Clek Liing on the UPPAbaby Cruz V2
What you need
The UPPAbaby Cruz V2
The Clek Liing carrier (its car base stays in the car)
The UPPAbaby Maxi-Cosi, Nuna, Cybex and Clek adapter for Vista and Cruz (model 0919-UMA-WW)
The adapter maker shows the fitting steps in pictures; see the manuals below.
Before every walk
Check that the carrier is locked on both sides the way your manual describes. How we check our answers
Last check: give the carrier handle a gentle tug. A seat that is fully latched does not lift off.
UPPAbaby says it needs an adapter (Maxi-Cosi, Nuna, Cybex and Clek adapter for Vista and Cruz).
“to the frame of your Vista (models 2015-2019), Vista V2, Vista V3, Cruz (models 2015-2019), Cruz V2, Cruz V3, and Kona … Only compatible with … Clek® Liing”
Clek says it needs an adapter (Liing adapter for UPPAbaby Vista and Cruz).
“The Clek Liing/Liingo car seat adapters have been specifically designed to be used with the UPPAbaby* Vista**, Vista V2, Vista V3 and Cruz, Cruz V2 and Cruz V3 strollers. … For use in Single Mode only.”