Which strollers does the UPPAbaby Mesa V3 fit?

6 strollers take it with no adapter and 6 with one adapter, according to the makers.

An infant carrier on a stroller in the park (illustration) — Illustration

UPPAbaby

Mesa V3

$349.99 list price

Carrier weighs 9.9 lb

How to install it in the car

Several UPPAbaby Mesa versions exist. Which one is yours?

Check price

UPPAbaby strollers that take the UPPAbaby Mesa V3

Some click right in; the rest need the adapter below.

Minu and Minu V2 adapter for Mesa and Aria (illustration)

Adapter you need

UPPAbaby Minu and Minu V2 adapter for Mesa and Aria

about $29.99 · for 2 seats below

Get it

Minu V3 adapter for Mesa and Aria (illustration)

Adapter you need

UPPAbaby Minu V3 adapter for Mesa and Aria

about $39.99 · for 1 seat below

Get it

Ridge adapter for Mesa and Aria (illustration)

Adapter you need

UPPAbaby Ridge adapter for Mesa and Aria

about $39.99 · for 2 seats below

Get it

Mockingbird strollers that take the UPPAbaby Mesa V3

You'll need this adapter.

Car seat adapter for UPPAbaby seats (illustration)

Adapter you need

Mockingbird Car seat adapter for UPPAbaby seats

about $50 · for 1 seat below

Get it

Illustration
MockingbirdSingle Stroller 2.0 *27 lb+ adapter
Check price

* The maker names the model but not which version; open the card for what to check.

Key specs

Child weight: 4–30 lb
Child height: up to 32 in
Carrier weight: 9.9 lb
Install: With the base or without
On a plane: Approved; the maker doesn't say about the base
Expires: 7 years after it was made

About the UPPAbaby Mesa V3

The UPPAbaby Mesa V3 is a rear-facing infant car seat for babies from 4 to 30 lb and up to 32 in tall. The carrier alone weighs 9.9 lb. Base: sMARTSecure base: auto-retracting LATCH or seat belt with built-in lock-off, tightness indicator, four-position adjustable foot. UPPAbaby says it is approved for use on aircraft. UPPAbaby gives it a 7-year life from the date of manufacture. List price: $349.99. UPPAbaby points to 4 to 30 lb, anti-rebound handle position, side-impact headrest, smartsecure latch install and 4 more; see the details below.

Highlights

4 to 30 lbFor babies from 4 to 30 lb and up to 32 inches tall, whichever comes first. UPPAbaby product page
Anti-rebound handle positionA fourth carry-handle position is used in the car to limit rebound. UPPAbaby product page
Side-impact headrestThe large headrest adjusts and adds side-impact protection. UPPAbaby product page
SmartSecure LATCH installThe base uses auto-retracting LATCH, a red-to-green tightness indicator and a four-position foot. UPPAbaby product page
European belt routingA European belt path lets you install the carrier without the base. UPPAbaby product page
UPF 50+ canopyA full-coverage UPF 50+ canopy with mesh vents and a peek window. UPPAbaby product page
Infant insert from 4 lbThe infant insert fits babies from 4 lb. UPPAbaby product page
Flame-retardant-free fabricThe fabric is made without flame-retardant chemicals. UPPAbaby product page

Putting a travel system together (illustration)

Build your travel system

Pick the other half to see the whole set at the makers' list prices.

Pick a stroller

List prices from the makers; stores and sales vary.

Three strollers side by side (illustration)

Compare the Mesa V3 with similar infant seats

The closest seats of the same kind by weight and price. Every figure is the maker's.

	UPPAbabyMesa V3This one	ChiccoFit2	ClekLiingo	BritaxWillow S
Carrier weight	9.9 lb	11 lb	9 lb	9.2 lb
Baby weight up to	30 lb	35 lb	30 lb	30 lb
Baby height up to	32 in	35 in	32 in	32 in
Without the base	Yes	Yes	Yes	—
On a plane	Yes	Yes	Yes	—
Expires after	7 yrs	6 yrs	9 yrs	6 yrs
Strollers that fit	12	15	12	4
…with no adapter	6	2	0	0
List price	$349.99	$329.99	$299.99	$279.99
	Check price	Check price	Check price	Check price

Putting it in the carHow to install the UPPAbaby Mesa V3 →UPPAbaby's steps for the base with LATCH, the base with the seat belt, no base with the European belt path, no base with a lap belt, the carrier on and off the base, and which bases it goes with.

How to use the UPPAbaby Mesa V3

Step-by-step guides from the maker's manual. Pick one.

Canopy

1The hide-away canopy sets in one of three positions.
2To open it, pull the main canopy frame forward slowly until it rests where you want it.
3To put it away, push the main canopy frame down gently so the support and fabric slide into the storage space in the carrier.
4In the car the canopy can be fully open or tucked away.

The maker warns:

Never remove the canopy while the seat is in the vehicle.

Retold from UPPAbaby manual (PDF).

Common problems with the UPPAbaby Mesa V3

1. Yes. UPPAbaby says the Mesa V3 carrier works with both the original Mesa base and the Mesa V2 base.
2. You do not need to buy a new base just because you upgraded the carrier.
1. Wipe the frame with a damp cloth and a mild detergent, then dry it well. Do not use anything abrasive.
2. If the frame touched salt water, rinse those parts with fresh tap water as soon as you can to stop corrosion.
3. Spot clean or hand wash the fabrics in cold water with mild detergent and dry them flat, out of direct sun. No bleach, ironing or dry cleaning.
4. Do not fold or store the stroller while it is damp or wet.
1. UPPAbaby sells genuine replacement parts, including wheels, seat fabrics and canopies, on its Spare Parts page.
2. If you cannot find the part you need, contact UPPAbaby Customer Experience at (844) 823-3132 or support@uppababy.com.

Compare UPPAbaby Mesa versions

UPPAbaby Mesa (original)
No adapter
6
With adapter
10
Don't fit
0
strollers
UPPAbaby Mesa V2
No adapter
6
With adapter
8
Don't fit
0
strollers
UPPAbaby Mesa Max
No adapter
6
With adapter
8
Don't fit
0
strollers
This oneUPPAbaby Mesa V3
No adapter
6
With adapter
6
Don't fit
0
strollers

How to tell which Mesa you have

The UPPAbaby Mesa V3: pros and cons

Why parents pick it

Fits 12 strollers, directly or with an adapter. (from the makers' fit charts)
6 strollers take it with no adapter. (from the makers' fit charts)
Approved for use on aircraft. (maker)
7-year life from manufacture. (maker)

Keep in mind

Rated to 30 lb, lower than most (32 lb), so babies outgrow it sooner. (compared with the strollers and seats we list)

Manuals and downloads

Straight from the makers. The manual that came with your product is the one to follow.

Mesa V3 ManualUPPAbaby Mesa V3 · PDF

Checking a question on a phone next to a stroller (illustration)

Frequently asked questions (15)

What are the weight and height limits of the UPPAbaby Mesa V3?

4–30 lb, up to 32 in tall.

UPPAbaby manual (PDF)

How much does the UPPAbaby Mesa V3 carrier weigh?

9.9 lb without the base.

UPPAbaby product page

Can you use the UPPAbaby Mesa V3 without the base?

Yes. UPPAbaby's manual describes 2 ways to install it with no base: with the European belt path; with a lap belt.

Install steps UPPAbaby manual (PDF)

How do I install the UPPAbaby Mesa V3?

UPPAbaby's manual gives 4 ways: with the base, using LATCH; with the base, using the car's seat belt; without the base, with the European belt path; without the base, with a lap belt.

Step by step

Is the UPPAbaby Mesa V3 FAA approved?

Yes, the maker says it is certified for use in aircraft.

Flying with a baby UPPAbaby product page

When does the UPPAbaby Mesa V3 expire?

7 years after the date it was made; the date is on the seat's label.

UPPAbaby manual (PDF)

What base does the UPPAbaby Mesa V3 use?

SMARTSecure base: auto-retracting LATCH or seat belt with built-in lock-off, tightness indicator, four-position adjustable foot.

UPPAbaby product page

Can I buy an extra UPPAbaby base?

A Mesa V3 carrier clicks into the original Mesa base and the Mesa V2 base, so an older spare base still works with the newer seat.