Which strollers does the UPPAbaby Mesa V2 fit?
6 strollers take it with no adapter and 8 with one adapter, according to the makers.
UPPAbaby strollers that take the UPPAbaby Mesa V2
Some click right in; the rest need the adapter below.
Illustration Illustration Illustration Illustration Illustration Illustration 
Illustration Illustration Illustration 
Illustration Illustration
Mockingbird strollers that take the UPPAbaby Mesa V2
You'll need this adapter.
Thule strollers that take the UPPAbaby Mesa V2
You'll need this adapter.
Adapter you need
Thule Urban Glide 3 universal adapter (Chicco and others)about $79.95 · for 1 seat below
WonderFold strollers that take the UPPAbaby Mesa V2
You'll need this adapter.
* The maker names the model but not which version; open the card for what to check.
Key specs
- Child weight
- 4–35 lb
- Child height
- up to 32 in
- Carrier weight
- 9.9 lb
- Install
- With the base or without
- Expires
- 7 years after it was made
About the UPPAbaby Mesa V2
The UPPAbaby Mesa V2 is a rear-facing infant car seat for babies from 4 to 35 lb and up to 32 in tall. The carrier alone weighs 9.9 lb. Base: base with lower anchor connectors or vehicle belt lock-off, tightness indicator, adjustment foot. UPPAbaby says it is approved for use on aircraft. UPPAbaby gives it a 7-year life from the date of manufacture. UPPAbaby points to 4 to 35 lb, anti-rebound handle position, side-impact headrest, smartsecure latch install and 4 more; see the details below.
Read more ↓Show less ↑
14 strollers take it according to the makers, 6 with no adapter (UPPAbaby Cruz (2015–2019), UPPAbaby Cruz V2, UPPAbaby Cruz V3 and 3 more). By kind: 8 full-size strollers, 3 compact travel strollers, 2 jogging strollers and 1 stroller wagon. The lightest pairing we have figures for is the UPPAbaby Minu (original) at 14.8 lb, about 24.7 lb with the carrier on.
Summary from the makers' published data.
Highlights
- 4 to 35 lbFor babies 4 to 35 lb and up to 32 inches tall, whichever comes first. UPPAbaby product page (archived copy)
- Anti-rebound handle positionA fourth carry-handle position is used in the car to limit rebound. UPPAbaby product page (archived copy)
- Side-impact headrestThe adjustable headrest includes side-impact protection. UPPAbaby product page (archived copy)
- SmartSecure LATCH installThe base uses auto-retracting LATCH, a red-to-green tightness indicator and a four-position foot. UPPAbaby product page (archived copy)
- European belt routingA European belt path lets you install the carrier without the base. UPPAbaby product page (archived copy)
- UPF 25+ hideaway canopyThe large canopy is UPF 25+ and tucks away. UPPAbaby product page (archived copy)
- Infant insert 4-11 lbAn infant insert and low harness position fit babies about 4 to 11 lb. UPPAbaby product page (archived copy)
- Flame-retardant-free fabricAll fabrics, including the canopy, are made without flame-retardant chemicals. UPPAbaby product page (archived copy)
Build your travel system
Pick the other half to see the whole set at the makers' list prices.
List prices from the makers; stores and sales vary.
Compare the Mesa V2 with similar infant seats
The closest seats of the same kind by weight and price. Every figure is the maker's.
| UPPAbabyMesa V2This one | BritaxB-Safe 35 | ChiccoKeyFit 35 | ChiccoKeyFit 30 | |
|---|---|---|---|---|
| Carrier weight | 9.9 lb | 10 lb | 10 lb | 9.5 lb |
| Baby weight up to | 35 lb | 35 lb | 35 lb | 30 lb |
| Baby height up to | 32 in | 32 in | 32 in | 30 in |
| Without the base | Yes | Yes | Yes | Yes |
| On a plane | Yes | — | Yes | Yes |
| Expires after | 7 yrs | 6 yrs | 6 yrs | 6 yrs |
| Strollers that fit | 14 | 1 | 15 | 16 |
| …with no adapter | 6 | 0 | 2 | 2 |
| List price | — | — | $229.99 | $229.99 |
| Check price | Check price | Check price | Check price |
How to use the UPPAbaby Mesa V2
Step-by-step guides from the maker's manual. Pick one.
Canopy
- 1The hide-away canopy sets in one of three positions.
- 2To open it, pull the main canopy frame forward slowly until it rests where you want it.
- 3To put it away, push the main canopy frame down gently so the support and fabric slide into the storage space in the carrier.
Retold from UPPAbaby manual (PDF).
Common problems with the UPPAbaby Mesa V2
- No. Take the Mesa V2 off the stroller first.
- This applies to the Vista, Cruz, Ridge and Minu.
- Yes. UPPAbaby says the Mesa V3 carrier works with both the original Mesa base and the Mesa V2 base.
- You do not need to buy a new base just because you upgraded the carrier.
- The seat pad, infant insert, buckle pad and shoulder pads can go in the washing machine on a gentle cycle; lay them flat to dry.
- Spot clean the canopy and the plastic parts instead of washing them.
- Clean the harness straps with warm water and dish soap.
- Wipe the frame with a damp cloth and a mild detergent, then dry it well. Do not use anything abrasive.
- If the frame touched salt water, rinse those parts with fresh tap water as soon as you can to stop corrosion.
- Spot clean or hand wash the fabrics in cold water with mild detergent and dry them flat, out of direct sun. No bleach, ironing or dry cleaning.
- Do not fold or store the stroller while it is damp or wet.
- UPPAbaby sells genuine replacement parts, including wheels, seat fabrics and canopies, on its Spare Parts page.
- If you cannot find the part you need, contact UPPAbaby Customer Experience at (844) 823-3132 or support@uppababy.com.
Compare UPPAbaby Mesa versions
- UPPAbaby Mesa (original)
- No adapter
- 6
- With adapter
- 10
- Don't fit
- 0
strollers
- This oneUPPAbaby Mesa V2
- No adapter
- 6
- With adapter
- 8
- Don't fit
- 0
strollers
- UPPAbaby Mesa Max
- No adapter
- 6
- With adapter
- 8
- Don't fit
- 0
strollers
- UPPAbaby Mesa V3
- No adapter
- 6
- With adapter
- 6
- Don't fit
- 0
strollers
The UPPAbaby Mesa V2: pros and cons
Why parents pick it
- Fits 14 strollers, directly or with an adapter. (from the makers' fit charts)
- 6 strollers take it with no adapter. (from the makers' fit charts)
- Rated for babies up to 35 lb (typical 32 lb), so it lasts longer. (compared with the strollers and seats we list)
- Approved for use on aircraft. (maker)
- 7-year life from manufacture. (maker)
Keep in mind
Nothing stands out in the makers' data.
Manuals and downloads
Straight from the makers. The manual that came with your product is the one to follow.
Frequently asked questions (15)
What are the weight and height limits of the UPPAbaby Mesa V2?
4–35 lb, up to 32 in tall.
Can you use the UPPAbaby Mesa V2 without the base?
Yes. UPPAbaby's manual describes 2 ways to install it with no base: with the European belt path; with a lap belt.
How do I install the UPPAbaby Mesa V2?
UPPAbaby's manual gives 4 ways: with the base, using LATCH; with the base, using the car's seat belt; without the base, with the European belt path; without the base, with a lap belt.
Is the UPPAbaby Mesa V2 FAA approved?
Yes, the maker says it is certified for use in aircraft.
When does the UPPAbaby Mesa V2 expire?
7 years after the date it was made; the date is on the seat's label.
What base does the UPPAbaby Mesa V2 use?
Base with lower anchor connectors or vehicle belt lock-off, tightness indicator, adjustment foot.
Can I buy an extra UPPAbaby base?
A Mesa V3 carrier clicks into the original Mesa base and the Mesa V2 base, so an older spare base still works with the newer seat.
Which strollers does the UPPAbaby Mesa V2 fit?
14 strollers, according to the makers: 6 take it with no adapter, 8 with one adapter.
Which strollers take the UPPAbaby Mesa V2 without an adapter?
UPPAbaby Cruz (2015–2019), UPPAbaby Cruz V2, UPPAbaby Cruz V3, UPPAbaby Vista (2015–2019) and 2 more.
Does the UPPAbaby Mesa V2 fit the Mockingbird Single Stroller 2.0?
Yes, with the Mockingbird Car seat adapter for UPPAbaby seats.
Does the UPPAbaby Mesa V2 fit the UPPAbaby Vista V2?
Yes, it clicks right in with no adapter.
Does the UPPAbaby Mesa V2 fit the UPPAbaby Vista V3?
Yes, it clicks right in with no adapter.
When do I use or remove the UPPAbaby Mesa V2 infant insert?
Use the included infant insert for smaller babies; it is recommended from 4 to 11 lbs. You can keep using it past 11 lbs until your baby meets every fit check below without it.
Can I fold the stroller with the Mesa V2 still clicked on?
No. Take the Mesa V2 off the stroller first. This applies to the Vista, Cruz, Ridge and Minu.
Specifications
Weight and size
| Carrier weight (no base) | 9.9 lb2 |
|---|
Base, safety and travel
| Base | Base with lower anchor connectors or vehicle belt lock-off, tightness indicator, adjustment foot1 |
|---|---|
| Approved for aircraft | Yes3 |
| Expires after | 7 years1 |
From the makers' fit charts
| Strollers that fit | 14 |
|---|---|
| …with no adapter | 6 |
| Ways to install (maker's manual) | 4 |
| Step-by-step guides | 7 |