Which strollers does the Chicco Fit2 LE fit?
0 strollers take it with no adapter and 6 with one adapter, according to the makers.
UPPAbaby strollers that take the Chicco Fit2 LE
You'll need this adapter.
Doesn't fit (1)
Key specs
About the Chicco Fit2 LE
The Chicco Fit2 LE is a rear-facing infant car seat. Chicco points to two-stage base, weight and height range, 7-position headrest, newborn insert and 4 more; see the details below.
Read more ↓Show less ↑
6 strollers take it according to the makers. By kind: 6 full-size strollers.
Summary from the makers' published data.
Highlights
- Two-stage baseThe base switches from infant to toddler position so the seat stays rear-facing up to 2 years. Chicco product page (archived copy)
- Weight and height range4-35 lb in stage one, 15-35 lb in stage two, up to 35 inches tall. Chicco product page (archived copy)
- 7-position headrestThe headrest has 7 positions and the harness needs no rethreading. Chicco product page (archived copy)
- Newborn insertRemovable head and body support for newborns and small babies. Chicco product page (archived copy)
- Anti-rebound barThe base has a built-in anti-rebound bar that presses against the vehicle seat. Chicco product page (archived copy)
- Seat belt install, lock-offsThe base can also be installed with the vehicle belt using built-in lock-offs. Chicco product page (archived copy)
- Washable fabricsThe Italian fabrics are machine-washable. Chicco product page (archived copy)
- One-hand handleThe carry handle, harness tightener and headrest adjust with one hand. Chicco product page (archived copy)
Build your travel system
Pick the other half to see the whole set at the makers' list prices.
List prices from the makers; stores and sales vary.
Compare the Fit2 LE with similar infant seats
The closest seats of the same kind by weight and price. Every figure is the maker's.
| ChiccoFit2 LEThis one | BritaxB-Safe 35 | BritaxB-Safe 35 Elite | BritaxB-Safe Gen2 | |
|---|---|---|---|---|
| Carrier weight | — | 10 lb | 11.5 lb | 10.9 lb |
| Baby weight up to | — | 35 lb | 35 lb | 35 lb |
| Baby height up to | — | 32 in | — | 32 in |
| Without the base | — | Yes | Yes | Yes |
| Expires after | — | 6 yrs | — | 6 yrs |
| Strollers that fit | 6 | 1 | 0 | 5 |
| …with no adapter | 0 | 0 | 0 | 0 |
| Check price | Check price | Check price | Check price |
How to use the Chicco Fit2 LE
Step-by-step guides from the maker's manual. Pick one.
Canopy
- 1To remove the canopy, press the button on the canopy mount and pull up; repeat on the other side.
- 2To attach it, insert both canopy mounts into the slots on the sides of the carrier until they click.
- 3Adjust it by rotating the canopy forward or backward.
Retold from Chicco manual (PDF).
Common problems with the Chicco Fit2 LE
- Yes. Chicco puts an expiration date on every car seat and every base.
- Check that date before you use a seat or base with your child.
- No. Chicco says to replace both the car seat and the base after a crash.
- This applies even when you can't see any damage.
- Hold the seat or base at the belt path, where the lower anchor strap or seat belt runs.
- Pull it side to side and front to back.
- It should not move more than an inch; if it does, uninstall it and start again.
- You may need to adjust the angle, or switch from the lower anchors to a seat belt install, depending on your car.
Compare Chicco Fit2 versions
- Chicco Fit2
- No adapter
- 2
- With adapter
- 13
- Don't fit
- 2
strollers
- This oneChicco Fit2 LE
- No adapter
- 0
- With adapter
- 6
- Don't fit
- 1
strollers
- Chicco Fit2 Air
- No adapter
- 0
- With adapter
- 6
- Don't fit
- 1
strollers
Frequently asked questions (6)
Can I buy an extra Chicco base?
KeyFit 30 carriers belong on KeyFit or KeyFit 30 bases. The KeyFit 35 and Fit2 carriers must not be used on a KeyFit or KeyFit 30 base.
Which strollers does the Chicco Fit2 LE fit?
6 strollers, according to the makers: 0 take it with no adapter, 6 with one adapter.
Does the Chicco Fit2 LE fit the UPPAbaby Vista V2?
Yes, with the UPPAbaby Chicco adapter for Vista and Cruz.
Does the Chicco Fit2 LE fit the UPPAbaby Vista V3?
Yes, with the UPPAbaby Chicco adapter for Vista and Cruz.
Does the Chicco Fit2 LE fit the UPPAbaby Cruz V2?
Yes, with the UPPAbaby Chicco adapter for Vista and Cruz.
When do I use or remove the Chicco Fit2 LE infant insert?
The newborn positioner is only for babies weighing 4 to 11 lbs; use only the one provided. Place the newborn positioner in the carrier seat, then pull the buckle through the slot in its bottom.
Specifications
From the makers' fit charts
| Strollers that fit | 6 |
|---|---|
| …with no adapter | 0 |
| Step-by-step guides | 7 |