Which strollers does the Chicco Fit2 Air fit?
0 strollers take it with no adapter and 6 with one adapter, according to the makers.
UPPAbaby strollers that take the Chicco Fit2 Air
You'll need this adapter.
Doesn't fit (1)
Key specs
- Carrier weight
- 11 lb
About the Chicco Fit2 Air
The Chicco Fit2 Air is a rear-facing infant car seat. The carrier alone weighs 11 lb. Chicco points to two-stage base, infant position, toddler position, airmesh seat pad and 4 more; see the details below.
Read more ↓Show less ↑
6 strollers take it according to the makers. By kind: 6 full-size strollers. The lightest pairing we have figures for is the UPPAbaby Cruz (2015–2019) at 21.5 lb, about 32.5 lb with the carrier on.
Summary from the makers' published data.
Highlights
- Two-stage baseA lever switches the base from infant to toddler position in one motion. Chicco product page (archived copy)
- Infant positionStage 1 is more reclined, with removable head and body support, for 4-35 lb. Chicco product page (archived copy)
- Toddler positionStage 2 is more upright with more leg room, for toddlers 15-35 lb. Chicco product page (archived copy)
- AirMesh seat padThe seat pad has 3D AirMesh channels for airflow. Chicco product page (archived copy)
- Baseless European belt pathThe carrier can be belted in without the base using 3 contact points. Chicco product page (archived copy)
- Anti-rebound bar, EPS foamHas EPS foam and a built-in anti-rebound bar. Chicco product page (archived copy)
- Ventilated canopyA full-coverage canopy with ventilation. Chicco product page (archived copy)
- One-hand headrest and handleThe 7-position headrest and carry handle adjust with one hand. Chicco product page (archived copy)
Build your travel system
Pick the other half to see the whole set at the makers' list prices.
List prices from the makers; stores and sales vary.
Compare the Fit2 Air with similar infant seats
The closest seats of the same kind by weight and price. Every figure is the maker's.
| ChiccoFit2 AirThis one | BritaxB-Safe Gen2 | CybexAton M | BritaxB-Safe 35 Elite | |
|---|---|---|---|---|
| Carrier weight | 11 lb | 10.9 lb | 10.9 lb | 11.5 lb |
| Baby weight up to | — | 35 lb | 35 lb | 35 lb |
| Baby height up to | — | 32 in | — | — |
| Without the base | — | Yes | Yes | Yes |
| On a plane | — | — | Yes | — |
| Expires after | — | 6 yrs | 6 yrs | — |
| Strollers that fit | 6 | 5 | 14 | 0 |
| …with no adapter | 0 | 0 | 0 | 0 |
| Check price | Check price | Check price | Check price |
How to use the Chicco Fit2 Air
Step-by-step guides from the maker's manual. Pick one.
Canopy
- 1To remove the canopy, press the button on the canopy mount and pull up; repeat on the other side.
- 2To attach it, insert both canopy mounts into the slots on the sides of the carrier until they click.
- 3Adjust it by rotating the canopy forward or backward.
Retold from Chicco manual (PDF).
Common problems with the Chicco Fit2 Air
- Yes. Chicco puts an expiration date on every car seat and every base.
- Check that date before you use a seat or base with your child.
- No. Chicco says to replace both the car seat and the base after a crash.
- This applies even when you can't see any damage.
- Hold the seat or base at the belt path, where the lower anchor strap or seat belt runs.
- Pull it side to side and front to back.
- It should not move more than an inch; if it does, uninstall it and start again.
- You may need to adjust the angle, or switch from the lower anchors to a seat belt install, depending on your car.
Compare Chicco Fit2 versions
- Chicco Fit2
- No adapter
- 2
- With adapter
- 13
- Don't fit
- 2
strollers
- Chicco Fit2 LE
- No adapter
- 0
- With adapter
- 6
- Don't fit
- 1
strollers
- This oneChicco Fit2 Air
- No adapter
- 0
- With adapter
- 6
- Don't fit
- 1
strollers
The Chicco Fit2 Air: pros and cons
Why parents pick it
Nothing stands out in the makers' data.
Keep in mind
- Heavier carrier than most: 11 lb (typical 9.5 lb). (compared with the strollers and seats we list)
Frequently asked questions (7)
How much does the Chicco Fit2 Air carrier weigh?
11 lb without the base.
Can I buy an extra Chicco base?
KeyFit 30 carriers belong on KeyFit or KeyFit 30 bases. The KeyFit 35 and Fit2 carriers must not be used on a KeyFit or KeyFit 30 base.
Which strollers does the Chicco Fit2 Air fit?
6 strollers, according to the makers: 0 take it with no adapter, 6 with one adapter.
Does the Chicco Fit2 Air fit the UPPAbaby Vista V2?
Yes, with the UPPAbaby Chicco adapter for Vista and Cruz.
Does the Chicco Fit2 Air fit the UPPAbaby Vista V3?
Yes, with the UPPAbaby Chicco adapter for Vista and Cruz.
Does the Chicco Fit2 Air fit the UPPAbaby Cruz V2?
Yes, with the UPPAbaby Chicco adapter for Vista and Cruz.
When do I use or remove the Chicco Fit2 Air infant insert?
The newborn positioner is only for babies weighing 4 to 11 lbs; use only the one provided. Place the newborn positioner in the carrier seat, then pull the buckle through the slot in its bottom.
Specifications
Weight and size
| Carrier weight (no base) | 11 lb1 |
|---|
From the makers' fit charts
| Strollers that fit | 6 |
|---|---|
| …with no adapter | 0 |
| Step-by-step guides | 7 |