Which infant car seats fit the Graco FastAction SE 2.0?
3 car seats click right in and 0 fit with one adapter, according to the makers.
Graco car seats for the Graco FastAction SE 2.0
They click right in. No adapter to buy.
Key specs
About the Graco FastAction SE 2.0
The Graco FastAction SE 2.0 is a jogging stroller. Graco points to one-hand standing fold, trays and cup holders, reclining seat, infant seat included and 1 more; the details are listed below.
Read more ↓Show less ↑
3 infant car seats click right in with no adapter: Graco SnugRide SnugFit 35, Graco SnugRide 35 Lite LX and Graco SnugRide SnugLock 35.
Graco has sold 4 versions of the FastAction, and this page is about the FastAction SE 2.0.
Summary from the makers' published data.
Highlights
- One-hand standing foldFolds in about a second with one hand and stands on its own. Graco product page (archived copy)
- Trays and cup holdersRemovable child tray with cup holders, and a parent tray with 2 deep cup holders. Graco product page (archived copy)
- Reclining seatThe seat has several recline positions. Graco product page (archived copy)
- Infant seat includedSold as a travel system that includes the SnugRide 35 Lite infant car seat (4-35 lb, up to 32 in). Graco product page (archived copy)
- Holds up to 50 lbThe stroller holds a child up to 50 lb. Graco product page (archived copy)
Build your travel system
Pick the other half to see the whole set at the makers' list prices.
List prices from the makers; stores and sales vary.
Compare the FastAction SE 2.0 with similar strollers
The closest strollers of the same kind by weight and price. Every figure is the maker's.
| GracoFastAction SE 2.0This one | BOBAlterrain Pro | BOBRevolution Flex 3.0 | BOBWayfinder | |
|---|---|---|---|---|
| Weight | — | 32.3 lb | 28.5 lb | 31.1 lb |
| Folded | — | 39.3 x 25.5 x 16 in (L x W x H, wheels on) | 38 x 25 x 16 in (L x W x H, wheels on) | 16.5 x 22 x 32.5 in (L x W x H, wheels on) |
| Child up to | — | 75 lb | 75 lb | 65 lb |
| Basket | — | 10 lb | 10 lb | 10 lb |
| Infant seats that fit | 3 | 15 | 15 | 5 |
| …with no adapter | 3 | 0 | 0 | 0 |
| List price | — | $829.99 | $649.99 | $679.99 |
| Check price | Check price | Check price | Check price |
How to use the Graco FastAction SE 2.0
Step-by-step guides from the maker's manual. Pick one.
Unfold
- 1Pull the strap and pull up on the handle.
- 2Push down on the seat and pull up on the handle until it snaps open; if the tray is on, you can pull up on the tray and handle together.
- 3Check it is latched every time by pushing down firmly on the handle.
- 4Don't put your child in until you have done that check.
- Be certain the stroller is fully erected and latched before allowing your child near the stroller.
Retold from Graco product page.
Common problems with the Graco FastAction SE 2.0
- Check that this seat and stroller are listed as compatible, and take your baby out before attaching the seat.
- Look for dirt or anything stuck in the stroller's attachment points and the seat's connectors.
- If your stroller needs adapters, make sure they are fitted correctly and fully secured.
- Take the seat off, press the release lever and check the latch plungers on both sides move freely; if one sticks, the seat can't lock on.
- Lower the seat straight down, facing the way the stroller manual says, until it clicks, then pull up gently to confirm. Don't use it until it is locked.
- Line the seat up with the base before lowering it in.
- Push down on the front of the seat and on the handle until you hear or feel a click, then pull up on the front corners to test it.
- Check the base itself is installed tightly and sits level as your manual describes.
- To take it out, squeeze the release handle on the back of the seat and lift straight up while holding it.
- If it still won't latch or release, don't force it; that can damage the latch. Contact Graco.
- Take out toys, blankets, cup holders or anything else that could be in the way.
- Put the seat, footrest and child tray (if it has one) in the right position for folding.
- Make sure no seat or canopy fabric is caught in the fold joints, and check the joints for dirt.
- Press the fold buttons, levers or handles all the way, on a flat surface, and try again.
- Don't force it closed; that can damage the stroller.
- Release the storage latch on the side of the stroller first; while it is engaged it keeps the stroller locked shut.
- Check no fabric or straps are caught in the frame, and clear any dirt around the joints.
- Stand it on flat, level ground and press the release buttons or levers fully, as your manual shows.
- Don't force it open.
- Put the buckle in a cup of warm water and swish it gently, pressing the red button several times while it's in the water.
- Don't put the buckle strap in the water, and don't use soap, detergent or lubricant.
- Shake out the water and let it air dry; repeat until it fastens with a click.
- Put the buckle back in the same slot it came from and pull up on it to check it is secure.
- Take the seat pad off and find the harness adjuster at the front of the seat.
- Vacuum out crumbs and small objects with the hand tool, then clear the grooves with a cotton swab.
- Buckle the harness, close the chest clip and tighten it.
- Pull the straps toward you without touching the release lever; they should not loosen.
- Both are printed on the serial number label.
- On traditional strollers, look on the rear leg or under the footrest.
- On umbrella strollers, look on the X-shaped tubes under the seat.
- It is also listed on the product page at gracobaby.com and in the owner's manual.
- Graco stamps the expiration information into the bottom or back of each seat, as a "Do Not Use After" date.
- Seats expire six to ten years after they were made, depending on the model.
- Check the date of manufacture on the white serial number label on the seat.
- Graco recommends replacing the seat on or before that date.
Compare Graco FastAction versions
- Graco FastAction (family)
- No adapter
- 0
- With adapter
- 0
- Don't fit
- 0
seats
- This oneGraco FastAction SE 2.0
- No adapter
- 3
- With adapter
- 0
- Don't fit
- 0
seats
- Graco FastAction Fold Jogger
- No adapter
- 3
- With adapter
- 0
- Don't fit
- 0
seats
- Graco FastAction Jogger LX
- No adapter
- 3
- With adapter
- 0
- Don't fit
- 0
seats
The Graco FastAction SE 2.0: pros and cons
Why parents pick it
- 3 seats click in with no adapter. (from the makers' fit charts)
Keep in mind
- Only 3 infant seats listed for it. (from the makers' fit charts)
- 4 versions share the FastAction name, and answers differ between them — check which one you have. (from the makers' fit charts)
Manuals and downloads
Straight from the makers. The manual that came with your product is the one to follow.
Frequently asked questions (8)
Which infant car seats fit the Graco FastAction SE 2.0?
3 seats, according to the makers: 3 click right in and 0 need one adapter.
Which car seats click into the Graco FastAction SE 2.0 without an adapter?
Graco SnugRide SnugFit 35, Graco SnugRide 35 Lite LX, Graco SnugRide SnugLock 35.
Do Graco car seats fit the Graco FastAction SE 2.0?
Yes. 3 Graco seats click right in with no adapter: SnugRide SnugFit 35, SnugRide 35 Lite LX, SnugRide SnugLock 35.
How do I fold the Graco FastAction SE 2.0?
Find the fold strap under the pocket on the seat (the label says to pull the strap to fold or unfold). Pull the strap up. Rotate the handle down until the stroller snaps shut.
How do I use the brake on the Graco FastAction SE 2.0?
Push both brakes down to lock them. Push both brakes up to unlock them. …
How do I clean the Graco FastAction SE 2.0?
Seat cover: follow the care tag on the seat pad; no bleach. Frame: use only household soap and warm water; no bleach or detergent. …
How do I adjust the harness on the Graco FastAction SE 2.0?
To open, press the button on the buckle to release the waist straps. To close, slide the shoulder strap connectors onto the waist straps and push them into the buckle. …
How do I recline the seat on the Graco FastAction SE 2.0?
Make sure your child's head, arms and legs are clear of the moving seat parts and frame. To recline, push the button down and pull the seat back. …
Specifications
From the makers' fit charts
| Infant seats that fit | 3 |
|---|---|
| …with no adapter | 3 |
| Adapters that work | 0 |