Nuna also sells these two together as the Nuna | PIPA urbn + MIXX next travel system.
This answer is for the Nuna MIXX next.
Key specs
Adapter
In the box
Weight with carrier
35.3 lb
Seat rated to
30 lb, 29 in
On planes (FAA)
Yes
Stroller folded
L 27.5 x W 23.6 x H 19 in
Good to know before you click it on
Only with PIPA series seats on a MIXX series stroller; adapter mounts either direction, carrier attaches to it one way only.
About this pair
The Nuna Pipa Urbn goes on the Nuna MIXX next with the Nuna MIXX car seat ring (in the box), which ships with the stroller. With the carrier on, you are pushing about 35.3 lb (28.3 lb stroller, 7 lb carrier). The seat itself is rated up to 30 lb and up to 29 in, per Nuna.
Read more ↓Show less ↑
8 other infant seats fit the Nuna MIXX next.
Summary from the makers' published data.
How to set up the Nuna Pipa Urbn on the Nuna MIXX next
What you need
The Nuna MIXX next
The Nuna Pipa Urbn carrier (its car base stays in the car)
The Nuna MIXX car seat ring (in the box) — it comes in the box
Step by step
1Slide the two halves of the ring adapter together until they click, then pull on both ends to check the join.
2Set the ring onto the stroller's seat mounts until it clicks; it can face forward or rearward.
3Place the PIPA car seat on the ring and press down until it clicks; it only fits one way.
4Pull up on the car seat to check it is locked to the ring and the ring is locked to the stroller.
Nuna says it needs an adapter (MIXX car seat ring (in the box)).
“The PIPA urbn pairs effortlessly with all Nuna strollers designed for PIPA series car seats, such as the TRIV™ series, TRVL™ series, MIXX™ next, and SWIV™ strollers.”
