Does the Nuna Pipa RX fit the Baby Jogger City Select 2?
Yes, with one adapter: the Baby Jogger City Select adapter for Nuna seats.
What you need
This answer is for the Baby Jogger City Select 2.
Key specs
- Adapter
- about $49.99
- Whole set, list prices
- $1259.98
- Weight with carrier
- 34.3 lb
- Seat rated to
- 30 lb, 30 in
- On planes (FAA)
- Yes
Good to know before you click it on
- Stroller folds with adapters attached.
About this pair
The Nuna Pipa RX goes on the Baby Jogger City Select 2 with the Baby Jogger City Select adapter for Nuna seats (model 2013551), about $49.99. With the carrier on, you are pushing about 34.3 lb (26.71 lb stroller, 7.6 lb carrier). The seat itself is rated up to 30 lb and up to 30 in, per Nuna.
Read more ↓Show less ↑
11 other infant seats fit the Baby Jogger City Select 2.
Summary from the makers' published data.
How to set up the Nuna Pipa RX on the Baby Jogger City Select 2
What you need
- The Baby Jogger City Select 2
- The Nuna Pipa RX carrier (its car base stays in the car)
- The Baby Jogger City Select adapter for Nuna seats (model 2013551)
Step by step
- Push the L and R adapter brackets into the stroller's mounting brackets until they click (left and right as seen facing the stroller).
- Press the handlebar adjustment button and slide the handlebar up.
- Fit the adapter's handlebar spacers just below the rubber grip on the handlebar.
- Set the car seat on the adapter and press down firmly until it clicks.
Retold from Baby Jogger product page.
Don't
- The handlebar spacers must be fitted.
- In Canada, the Maxi-Cosi Mico Max 30 and Nuna PIPA Lite do not fit on the City Select 2 with the car seat on top and the second seat rear-facing.
Last check: give the carrier handle a gentle tug. A seat that is fully latched does not lift off.
Install the Pipa RX in the car →Fold and use the City Select 2 →
Questions about this pair (8)
Does the Nuna Pipa RX fit the Baby Jogger City Select 2?
Yes, with one adapter: the Baby Jogger City Select adapter for Nuna seats.
Which adapter do I need for the Nuna Pipa RX on the Baby Jogger City Select 2?
Baby Jogger City Select adapter for Nuna seats (about $49.99).
Can I fold the City Select 2 with the adapter on?
Stroller folds with adapters attached.
How heavy are they together?
34.3 lb: the City Select 2 weighs 26.71 lb and the Pipa RX carrier 7.6 lb.
How much does the whole set cost?
About $1,259.98 at the makers' list prices, including the $49.99 adapter. Stores and sales vary.
Can I take the Pipa RX on a plane?
Yes, with or without the base, the maker says.
How do I install the Pipa RX in the car?
Nuna's manual gives 4 ways; the steps are on its install page.
Where does this answer come from?
From the makers' own pages: Baby Jogger manual (PDF).
Other car seats for the Baby Jogger City Select 2
Illustration Illustration Illustration Illustration Illustration Illustration
Other strollers for the Nuna Pipa RX
Illustration 
Illustration Illustration Illustration Illustration Illustration
Pros and cons of this pairing
Why parents pick it
- The car seat can fly with you (FAA approved). (maker)
Keep in mind
- Needs the Baby Jogger City Select adapter for Nuna seats (about $49.99). (maker)
Manuals and downloads
Straight from the makers. The manual that came with your product is the one to follow.
How we know: the makers' own words
Baby Jogger says it needs an adapter (City Select adapter for Nuna seats).
“2026 INFANT CAR SEAT (ICS) COMPATIBILITY LIST ... Nuna: PIPA RX | city select 2: 2013551”
Baby Jogger manual (PDF) · checked 2026-09-24
Always check both manuals before the first walk. How we check.