Stroller canopy must be removed for all Chicco Fit2 and KeyFit models listed.
About this pair
The Chicco Fit2 goes on the Thule Urban Glide 3 with the Thule Urban Glide 3 universal adapter (Chicco and others) (model 20110762), about $79.95. With the carrier on, you are pushing about 37.2 lb (26.2 lb stroller, 11 lb carrier). The seat itself is rated up to 35 lb and up to 35 in, per Chicco.
Read more ↓Show less ↑
18 other infant seats fit the Thule Urban Glide 3.
The answer is not the same on every Urban Glide: it differs on the Urban Glide 2, as the table below shows.
Summary from the makers' published data.
How to set up the Chicco Fit2 on the Thule Urban Glide 3
What you need
The Thule Urban Glide 3
The Chicco Fit2 carrier (its car base stays in the car)
The Thule Urban Glide 3 universal adapter (Chicco and others) (model 20110762)
The adapter maker shows the fitting steps in pictures; see the manuals below.
Before every walk
Check that the carrier is locked on both sides the way your manual describes. How we check our answers
Last check: give the carrier handle a gentle tug. A seat that is fully latched does not lift off.
Thule says it needs an adapter (Urban Glide 3 universal adapter (Chicco and others)).
“THULE URBAN GLIDE 3 CAR SEAT ADAPTER - UNIVERSAL | 20110762 | COMPATIBILITY CHART FOR USE ON THULE URBAN GLIDE 3 SINGLE STROLLER | Chicco | Fit 2 * (* Stroller canopy must be removed when using this car seat.)”