Which strollers does the Cybex Cloud T fit?
0 strollers take it with no adapter and 6 with one adapter, according to the makers.
Cybex strollers that take the Cybex Cloud T
You'll need one of these adapters.
Adapter · in the box
Cybex Priam car seat adapter (in the box)Comes with the stroller · for 1 seat below
Thule strollers that take the Cybex Cloud T
You'll need this adapter.
WonderFold strollers that take the Cybex Cloud T
You'll need this adapter.
Adapter you need
WonderFold W2 wagon adapter for Nuna, Cybex, Maxi-Cosi and Clek seatsabout $99.99 · for 1 seat below
* The maker names the model but not which version; open the card for what to check.
Key specs
- Child weight
- 4–30 lb
- Child height
- up to 32 in
- Carrier weight
- 12 lb
- Install
- With the base or without
- Expires
- 6 years after it was made
About the Cybex Cloud T
The Cybex Cloud T is a rear-facing infant car seat for babies from 4 to 30 lb and up to 32 in tall. The carrier alone weighs 12 lb. Base: anti-rebound base with load leg; rigid LATCH. Cybex says it is approved for use on aircraft. Cybex gives it a 6-year life from the date of manufacture. List price: $649.95. Cybex points to flat recline outside car, load leg + anti-rebound, fold-away side protector, sensorsafe chest clip and 4 more; see the details below.
Read more ↓Show less ↑
6 strollers take it according to the makers. By kind: 3 full-size strollers, 2 compact travel strollers and 1 stroller wagon. The lightest pairing we have figures for is the Cybex Eezy S Twist+ 2 at 18.9 lb, about 30.9 lb with the carrier on.
Summary from the makers' published data.
Highlights
- Flat recline outside carOut of the car, backrest and leg rest flatten together. Cybex product page
- Load leg + anti-reboundThe Cloud T base has a load leg and an anti-rebound bar. Cybex product page
- Fold-away side protectorL.S.P. side protection that folds away when space is tight. Cybex product page
- SensorSafe chest clipBluetooth chest clip alerts your phone if it is unbuckled, the back seat is too hot or cold, or baby is left behind. Cybex product page
- UPF 50+ canopyRetractable extra-large UPF 50+ canopy. Cybex product page
- 12-position headrestThe headrest has 12 height positions. Cybex product page
- GREENGUARD GoldThe maker states it is GREENGUARD Gold certified for low chemical emissions. Cybex product page
- Child size rangeFor babies 4 to 30 lb and up to 32 inches. Cybex product page
Build your travel system
Pick the other half to see the whole set at the makers' list prices.
List prices from the makers; stores and sales vary.
Compare the Cloud T with similar infant seats
The closest seats of the same kind by weight and price. Every figure is the maker's.
| CybexCloud TThis one | BugabooTurtle Air Shield by Nuna | CybexCloud Q | Peg PeregoPrimo Viaggio Lounge | |
|---|---|---|---|---|
| Carrier weight | 12 lb | 8.8 lb | 13.9 lb | 10.4 lb |
| Baby weight up to | 30 lb | 30 lb | 35 lb | 30 lb |
| Baby height up to | 32 in | 30 in | 30 in | 32 in |
| Without the base | Yes | — | Yes | — |
| On a plane | Yes | — | Yes | — |
| Expires after | 6 yrs | — | 6 yrs | 7 yrs |
| Strollers that fit | 6 | 4 | 5 | 0 |
| …with no adapter | 0 | 0 | 0 | 0 |
| List price | $649.95 | $649 | $519.95 | $499.99 |
| Check price | Check price | Check price | Check price |
How to use the Cybex Cloud T
Step-by-step guides from the maker's manual. Pick one.
Canopy
- 1The built-in canopy has four positions.
- 2Pull it forward to extend it.
- 3Push it back gently to fold it away.
Retold from Cybex manual (PDF).
Common problems with the Cybex Cloud T
- Cybex sells replacement parts through its US customer service team, called ParentLink.
- Email info.us@cybex-online.com or call 1-877-242-5676 and say which seat you have and which part you need.
- Turn the carrier over: the sticker with both dates is on the bottom of the seat.
- Cybex certifies this infant seat for 6 years from the date of manufacture.
- Once it has expired, Cybex suggests asking your local community recycling center about recycling it.
- Cybex infant seats are designed to work with any Cybex stroller.
- Use the car seat adapters that come in the box with the Cybex stroller.
- Cybex says each stroller maker decides which seats fit its strollers.
- Some other stroller brands sell their own adapters for Cybex seats.
- Check the other stroller's user manual to see whether it offers a compatible adapter.
- Yes: the carrier has separate belt guides for installing it without the base.
- Use a locking lap-and-shoulder vehicle belt only.
- Make sure the vehicle's buckle and belt hardware don't press against the carrier.
- Follow the no-base installation pages in your owner's manual.
- Keep one hand on the carry handle.
- Squeeze the recline release handle and push the seat back down until it locks flat.
- To return to car mode, squeeze the release handle again and lift the seat back until it locks upright.
- The flat position is only for use outside the car.
- First make sure the seat is installed tightly with either LATCH or the vehicle belt.
- Check it moves less than 1 inch at the belt path, as your manual describes.
- If it's tight, a small gap is acceptable.
- If your vehicle seat back adjusts, making it more upright can help close the gap.
The Cybex Cloud T: pros and cons
Why parents pick it
- Approved for use on aircraft. (maker)
Keep in mind
- Heavier carrier than most: 12 lb (typical 9.5 lb). (compared with the strollers and seats we list)
- Rated to 30 lb, lower than most (32 lb), so babies outgrow it sooner. (compared with the strollers and seats we list)
- 6-year life from manufacture. (maker)
Manuals and downloads
Straight from the makers. The manual that came with your product is the one to follow.
Frequently asked questions (15)
What are the weight and height limits of the Cybex Cloud T?
4–30 lb, up to 32 in tall.
Can you use the Cybex Cloud T without the base?
Yes. Cybex's manual describes 2 ways to install it with no base: with the European belt path; with a lap belt.
How do I install the Cybex Cloud T?
Cybex's manual gives 4 ways: with the base, using LATCH; with the base, using the car's seat belt; without the base, with the European belt path; without the base, with a lap belt.
Is the Cybex Cloud T FAA approved?
Yes, the maker says it is certified for use in aircraft.
When does the Cybex Cloud T expire?
6 years after the date it was made; the date is on the seat's label.
What base does the Cybex Cloud T use?
Anti-rebound base with load leg; rigid LATCH.
Can I buy an extra Cybex base?
The Cloud T sits on its own Cloud T Base, which has an anti-rebound bar and a load leg.
Which strollers does the Cybex Cloud T fit?
6 strollers, according to the makers: 0 take it with no adapter, 6 with one adapter.
Does the Cybex Cloud T fit the Cybex Gazelle S?
Yes, with the Cybex Gazelle S car seat adapter.
Does the Cybex Cloud T fit the WonderFold W2 wagon?
Yes, with the WonderFold W2 wagon adapter for Nuna, Cybex, Maxi-Cosi and Clek seats.
Does the Cybex Cloud T fit the Thule Urban Glide 3?
Yes, with the Thule Urban Glide 3 adapter for Maxi-Cosi seats.
When do I use or remove the Cybex Cloud T infant insert?
Use the infant insert for smaller babies for a better harness fit and more support. Cybex suggests using it until about 11 lb or about 3 months.
How much does the Cybex Cloud T cost?
Cybex lists it at $649.95. Store prices and sales vary.
Where do I get a replacement part for my Cybex infant car seat?
Cybex sells replacement parts through its US customer service team, called ParentLink. Email info.us@cybex-online.com or call 1-877-242-5676 and say which seat you have and which part you need.
Specifications
Weight and size
| Carrier weight (no base) | 12 lb1 |
|---|
Base, safety and travel
| Base | Anti-rebound base with load leg; rigid LATCH1 |
|---|---|
| Approved for aircraft | Yes1 |
| Expires after | 6 years1 |
Price and dates
| List price | $649.951 |
|---|
From the makers' fit charts
| Strollers that fit | 6 |
|---|---|
| …with no adapter | 0 |
| Ways to install (maker's manual) | 4 |
| Step-by-step guides | 7 |