First Baby Mall

Does the UPPAbaby Mesa (original) fit the WonderFold W2 wagon?

Yes, with an adapter

Yes, with one adapter: the WonderFold W2 wagon adapter for UPPAbaby seats.

What you need

UPPAbaby Mesa (original) (illustration)
Illustration
Car seatUPPAbaby Mesa (original)price not listedCheck price
W2 wagon adapter for UPPAbaby seats (illustration)
Illustration
AdapterWonderFold W2 wagon adapter for UPPAbaby seatsabout $99.99Get this adapter
WonderFold W2 wagon (illustration)
Illustration
StrollerWonderFold W2 wagon$399 list priceCheck price

This answer is for the WonderFold W2 wagon, though one maker didn't say which version.

Key specs

Adapter
about $99.99
Weight with carrier
49.9 lb

Good to know before you click it on

  • W2 Original and W2 Original Target Exclusive owners must buy the 'W2 Elite/Luxe' adapter option.
  • Seat models from 2024 onward are not guaranteed; only pre-2024 seat models were tested.
  • Two UPPAbaby adapters can be fitted on W2 Elite/Luxe (non-Pro) models.

About this pair

The UPPAbaby Mesa (original) goes on the WonderFold W2 wagon with the WonderFold W2 wagon adapter for UPPAbaby seats (model W2CSA-UPB), about $99.99. With the carrier on, you are pushing about 49.9 lb (40 lb stroller, 9.9 lb carrier).

Read more ↓

14 other infant seats fit the WonderFold W2 wagon.

Summary from the makers' published data.

How to set up the UPPAbaby Mesa (original) on the WonderFold W2 wagon

An infant car seat mounted on a stroller (illustration)

What you need

  • The WonderFold W2 wagon
  • The UPPAbaby Mesa (original) carrier
  • The WonderFold W2 wagon adapter for UPPAbaby seats (model W2CSA-UPB)

Step by step

  1. Set the stroller wagon's brake and unbutton the wagon fabric on the side where the adapter goes.
  2. Put a mounting bracket on each side of the frame with the metal piece on the outside, lined up with each other.
  3. Close the clasps around the frame, screw them shut, then fold the fabric back over the brackets and button it.
  4. Screw the car seat supports onto the adapter.
  5. Set the adapter on the brackets, then lock it by putting the metal clip over the bracket and pushing the clamp in.
  6. For extra stability, lower the car seat handle, strap it to the wagon's bottom crossbar and pull the strap tight.

Retold from WonderFold manual (PDF).

Don't

  • A single car seat adapter must go on the front half of the wagon; with two, install the front one first.
  • With two car seats, both must face sideways.
  • If the two brackets are not lined up, the adapter will not mount properly.
Checking the car seat is locked in (illustration)

Last check: give the carrier handle a gentle tug. A seat that is fully latched does not lift off.

Fold and use the W2 wagon →

Checking a question on a phone next to a stroller (illustration)

Questions about this pair (4)

Does the UPPAbaby Mesa (original) fit the WonderFold W2 wagon?

Yes, with one adapter: the WonderFold W2 wagon adapter for UPPAbaby seats.

WonderFold adapter page

Which adapter do I need for the UPPAbaby Mesa (original) on the WonderFold W2 wagon?

WonderFold W2 wagon adapter for UPPAbaby seats (about $99.99).

Adapter details

How heavy are they together?

49.9 lb: the W2 wagon weighs 40 lb and the Mesa (original) carrier 9.9 lb.

Where does this answer come from?

From the makers' own pages: WonderFold adapter page.

See the makers' words

Other car seats for the WonderFold W2 wagon

All 14 car seats for the WonderFold W2 wagon →

Other strollers for the UPPAbaby Mesa (original)

All 15 strollers for the UPPAbaby Mesa (original) →

Pros and cons of this pairing

Why parents pick it

Nothing stands out in the makers' data.

Keep in mind

  • Needs the WonderFold W2 wagon adapter for UPPAbaby seats (about $99.99). (maker)
  • Heavy together: about 49.9 lb (a typical pairing is 34.4 lb). (compared with the strollers and seats we list)
  • One maker didn't say which stroller version this applies to. (from the makers' fit charts)

Manuals and downloads

Straight from the makers. The manual that came with your product is the one to follow.

How we know: the makers' own words

  1. WonderFold says it needs an adapter (W2 wagon adapter for UPPAbaby seats), without saying which version.

    “Compatibility Guide ... Only compatible with W Elite/Luxe/Pro Series, L Series, W2 Original Target Exclusive, and W2 Original ... UPPAbaby | Mesa, Mesa V2 | *Not compatible with Aria or Aria V2”

    WonderFold adapter page · checked 2026-09-24

Always check both manuals before the first walk. How we check.