Which strollers does the Cybex Aton fit?
0 strollers take it with no adapter and 11 with one adapter, according to the makers.
Cybex
Aton
Carrier weighs 8.8 lb
UPPAbaby strollers that take the Cybex Aton
You'll need one of these adapters.
Adapter you need
UPPAbaby Maxi-Cosi, Nuna, Cybex and Clek adapter for Vista and Cruzabout $49.99 · for 6 seats below
Adapter you need
UPPAbaby Minu and Minu V2 adapter for Maxi-Cosi, Nuna and Cybex seatsabout $54.99 · for 2 seats below
Adapter you need
UPPAbaby Minu V3 adapter for Maxi-Cosi, Nuna, Cybex, Clek and Joie seatsabout $69.99 · for 1 seat below
Adapter you need
UPPAbaby Ridge adapter for Maxi-Cosi, Nuna, Cybex, Clek and Joie seatsabout $49.99 · for 2 seats below
Illustration Illustration Illustration 
Illustration Illustration Illustration 
Illustration Illustration Illustration Illustration Illustration
Doesn't fit (1)
Key specs
- Carrier weight
- 8.8 lb
About the Cybex Aton
The Cybex Aton is a rear-facing infant car seat. The carrier alone weighs 8.8 lb. Cybex points to child size range, base: latch or belt, handle up in car, two-position canopy and 2 more; see the details below.
Read more ↓Show less ↑
11 strollers take it according to the makers. By kind: 6 full-size strollers, 3 compact travel strollers and 2 jogging strollers. The lightest pairing we have figures for is the UPPAbaby Minu (original) at 14.8 lb, about 23.6 lb with the carrier on.
Summary from the makers' published data.
Highlights
- Child size rangeFor babies 4 to 32 lb and up to 30 inches tall. Cybex product page (archived copy)
- Base: LATCH or beltThe base installs with LATCH or the vehicle belt. Cybex product page (archived copy)
- Handle up in carThe maker says the carry handle must be up when the seat is in a vehicle. Cybex product page (archived copy)
- Two-position canopyBuilt-in canopy with two positions that tucks under a cover. Cybex product page (archived copy)
- Newborn insertsComes with an infant insert and a newborn inlay for small babies. Cybex product page (archived copy)
- Washable coversFabric covers are machine washable. Cybex product page (archived copy)
Build your travel system
Pick the other half to see the whole set at the makers' list prices.
List prices from the makers; stores and sales vary.
Compare the Aton with similar infant seats
The closest seats of the same kind by weight and price. Every figure is the maker's.
| CybexAtonThis one | BugabooTurtle Air Shield by Nuna | ClekLiing | ClekLiingo | |
|---|---|---|---|---|
| Carrier weight | 8.8 lb | 8.8 lb | 9 lb | 9 lb |
| Baby weight up to | — | 30 lb | 30 lb | 30 lb |
| Baby height up to | — | 30 in | 32 in | 32 in |
| Without the base | — | — | Yes | Yes |
| On a plane | — | — | Yes | Yes |
| Expires after | — | — | 9 yrs | 9 yrs |
| Strollers that fit | 11 | 4 | 22 | 12 |
| …with no adapter | 0 | 0 | 0 | 0 |
| List price | — | $649 | $499.99 | $299.99 |
| Check price | Check price | Check price | Check price |
How to use the Cybex Aton
Step-by-step guides from the maker's manual. Pick one.
Harness
- 1Loosen the harness by pressing the harness adjustment button firmly while pulling both straps forward.
- 2Press the red buckle button, open the chest clip and spread the straps apart.
- 3Sit your baby with bottom in the seat and back fully supported; gently straighten newborn arms and legs, minding sensitive spots.
- 4Bring the straps over the arms and shoulders with the buckle pad and buckle between the legs.
- 5Click each tongue into the buckle one at a time and check the straps are not twisted, then close the chest clip and tighten.
Retold from Cybex manual (PDF) (archived copy).
Frequently asked questions (7)
How much does the Cybex Aton carrier weigh?
8.8 lb without the base.
Can I buy an extra Cybex base?
The Cloud T sits on its own Cloud T Base, which has an anti-rebound bar and a load leg.
Which strollers does the Cybex Aton fit?
11 strollers, according to the makers: 0 take it with no adapter, 11 with one adapter.
Does the Cybex Aton fit the UPPAbaby Vista V2?
Yes, with the UPPAbaby Maxi-Cosi, Nuna, Cybex and Clek adapter for Vista and Cruz.
Does the Cybex Aton fit the UPPAbaby Vista V3?
Yes, with the UPPAbaby Maxi-Cosi, Nuna, Cybex and Clek adapter for Vista and Cruz.
Does the Cybex Aton fit the UPPAbaby Minu V3?
Yes, with the UPPAbaby Minu V3 adapter for Maxi-Cosi, Nuna, Cybex, Clek and Joie seats.
When do I use or remove the Cybex Aton infant insert?
Use the infant insert for better head and upper body support and a better harness fit on small babies. Cybex recommends it until 22 lb or until your child needs more room.
Specifications
Weight and size
| Carrier weight (no base) | 8.8 lb1 |
|---|
From the makers' fit charts
| Strollers that fit | 11 |
|---|---|
| …with no adapter | 0 |
| Step-by-step guides | 6 |